TINMO B10 FLASH FILE
Action : Read Firmware.
Selected 0-By CPU:MT6580
Exe version: NCKDongle AndroidMTK 2.5.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM56)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 484a019064314734a1
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM55)
Build ID: LMY47I
Display ID: LMY47I test-keys
Version: 5.1
Build Date: Thu Apr 4 17:37:19 CST 2019
Model: B10
Brand: alps
Device: hct6580_weg_a_l
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 355142090044299
IMEI[2] from NVRAM: 355142090044307
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x60000000
Saved to : D:\READ FLASH FILE\Android_MTK\firmware_backup\MT6580_EMMC_alps_B10_5_1_ALPS_L1_MP6_V2_19_HCT6580_WEG_A_L_P55
Wait untill phone will start charging.
[0]All done.
FLASH FILE PAID-01776073121