TINMO B10 FLASH FILE MT6580 ANDROID 5.1 FIRMWARE

TINMO B10 FLASH FILE



 Action : Read Firmware.
 Selected 0-By CPU:MT6580
 Exe version: NCKDongle AndroidMTK 2.5.9.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MTK USB Port (COM56)
 Boot mode: Brom
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 [emmi]EMMC CID: 484a019064314734a1
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404 
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : DA USB VCOM Port (COM55)
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Thu Apr  4 17:37:19 CST 2019
 Model: B10
 Brand: alps
 Device: hct6580_weg_a_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: 355142090044299
 IMEI[2] from NVRAM: 355142090044307
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing lk ......
 Start processing boot 
 Start processing recovery 
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000        
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000        
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000      
 Saved to : D:\READ FLASH FILE\Android_MTK\firmware_backup\MT6580_EMMC_alps_B10_5_1_ALPS_L1_MP6_V2_19_HCT6580_WEG_A_L_P55
 Wait untill phone will start charging.
 [0]All done.

FLASH FILE PAID-01776073121

Previous Post Next Post